$20,000.00 $16,999.00
A full-body red light therapy system designed to recharge your energy, accelerate recovery, and support consistent high performance — all from the comfort of your home in just 15-20 minutes.
BioVitality Pro™ delivers high-power red and near-infrared light designed to
support energy, recovery, and full-body performance.
Light Technology
Red and near-infrared LED system designed for full-body exposure
Wavelength Range
Optimized combination of red and near-infrared light (633nm, 660nm, 810nm, 940nm)
Output Performance
High-output system delivering up to ~60 mW/cm² across the unit
Session Modes
5 guided programs + manual control for flexible use
Display & Controls
Integrated touchscreen interface for simple operation
Power System
Standard home-compatible power (110V / 220V)
Cooling System
Intelligent temperature-controlled cooling for consistent performance
Build &Design
Full-body panel + bed configuration designed for home or professionalenvironments
BioVitality Pro™ is not just a device — it’s a complete system designed to help you integrate energy, recovery, and performance into your daily life.
The BioVitality Pro™ System
The Performany™ System (Included)
This is where your investment compounds.
A structured training system designed to help you build a Performance Lifestyle
Guided protocols for different goals, helping you use the system effectively
A simple starting framework to help you build consistency from day one
Full-body red light therapy, also known as photobiomodulation (PBM), is a safe, non-invasive wellness technology that uses specific wavelengths of red and near-infrared light to support the body’s natural processes.
By delivering light across the entire body at once, it creates a more complete, whole-body experience that may help support cellular energy production, circulation, recovery, and relaxation. Many people incorporate PBM into their routine to support recovery, maintain an active lifestyle, and enhance general vitality—all with no known negative effects.
During normal cellular activity, the body produces signaling molecules like nitric oxide (NO) and maintains balance through natural systems supported by nutrition, rest, and lifestyle.
However, in today’s environment—marked by higher stress, environmental exposure, and constant demand—this balance can be disrupted.
This may lead to increased oxidative stress (ROS), reduced mitochondrial efficiency, lower ATP (cellular energy) production, and slower repair processes.
Over time, especially with age, this contributes to lower energy, slower recovery, and the accumulation of senescent or “zombie” cells that no longer function optimally.
Red and near-infrared light therapy, also known as photobiomodulation (PBM), has been studied for its ability to interact with cellular components involved in energy production, including mitochondrial pathways and enzymes such as cytochrome c oxidase.
When delivered at appropriate wavelengths and intensity, this light may help support mitochondrial activity, ATP production, and efficient cellular function—supporting energy, recovery, and overall vitality.
This approach works best when combined with structured protocols and lifestyle habits, which is why BioVitality Pro™ is paired with guided systems such as the BioVitality Protocol™, the PBM Protocol Library, and MyPL365™.
Please note this is not intended to diagnose, treat, cure, or prevent any disease, but is only intended to support the body’s natural processes.
With so many red light therapy devices on the market—panels, portable units, and full-body systems—most focus on wavelengths and power.
But effective full-body red light therapy depends on more than that: wavelength, irradiance, dose, coverage, and consistency.
Even high-powered systems can deliver suboptimal results if exposure is partial, distance varies, or usage isn’t consistent.
BioVitality Pro™ is designed to address the full equation—combining high-output light, an optimized red and near-infrared spectrum, and true full-body top-to-bottom coverage in a single session.
Paired with guided protocols, photobiomodulation becomes simple, consistent, and effective—supporting better energy, recovery, and performance over time.
Up to ~60 mW/cm² irradiance, delivering clinically relevant intensity to support energy, recovery, and performance—not just surface-level exposure.
Even with body positioning and distance, maintains effective output (~42–46 mW/cm²) across the body—helping ensure consistent dosing during actual use.
Combines 633nm, 660nm, 810nm, and 850nm wavelengths to support:
• skin and collagen (red light)
• muscle, joints, and deeper tissue (near-infrared)
Designed to interact with mitochondrial function—helping support energy production, recovery, and overall performance.
Adjustable settings allow flexibility for different goals—whether focused on recovery, relaxation, or performance.
7-inch touchscreen with 5 preset modes + manual control, so you can use it easily or fine-tune sessions when needed.
1400+ LEDs with a wide beam angle ensure consistent light distribution across the body—minimizing dead zones.
50,000-hour LED lifespan and intelligent cooling system maintain stable output and comfort during extended sessions.
Supports metabolic activity and helps the body use stored fat more efficiently.
May improve circulation and skin texture for a smoother, more even appearance.
Helps optimize metabolic function for better energy use and calorie burn.
Promotes cellular repair and supports healthier, more youthful‑looking skin.
May assist in softening scar tissue and improving overall skin tone.
Helps calm redness and support a more balanced skin response.
Supports cellular repair to reduce the visible effects of UV exposure.
Encourages collagen production for firmer, more lifted skin.
Helps reduce discomfort by supporting circulation and tissue recovery.
May accelerate the body’s natural healing response for minor wounds.
Supports tissue repair and reduces inflammation around injured areas.
Enhances cellular energy and recovery to support lean muscle development.
Improves oxygenation and cellular output for better training capacity.
Helps reduce soreness and speed up muscle recovery after exercise.
Supports clearer thinking and improved cognitive function.
Helps regulate the body’s inflammatory response for overall wellness.
Full body red light therapy, also known as photobiomodulation (PBM), uses red and near-infrared light to support cellular energy (ATP), circulation, and recovery. BioVitality Pro™ delivers this light to the entire body simultaneously, providing a more complete and efficient approach than localized devices.
Yes. BioVitality Pro™ delivers high-output light (up to ~60 mW/cm²) using an optimized combination of red and near-infrared wavelengths. It is designed to compete with leading systems like Joovv, Mito Red, and Platinum LED—while also providing full-body top + bottom coverage for more complete exposure.
Most red light therapy panels treat one area at a time and require repositioning, which can lead to inconsistent coverage and longer sessions. BioVitality Pro™ delivers full body red light therapy from both top and bottom in a single session—making it easier to achieve consistent, even exposure without guesswork.
Consistency is key. Most users start with 3–5 sessions per week, with each session lasting 15–20 minutes. BioVitality Pro™ is designed for easy, repeatable use at home and includes guided protocols to help you stay consistent and get the most out of each session.
No. While BioVitality Pro™ is built with advanced specifications (wavelengths, irradiance, and dosing), it also includes preset programs and guided protocols so you can use it effectively without technical knowledge. Advanced users can still customize settings if desired.
Most red light therapy devices give you access to the technology but leave you to figure out how to use it. BioVitality Pro™ includes the BioVitality Protocol™, PBM Protocol Library, 7-Day Energy Rhythm & Reset, and MyPL365™ to help you use it consistently and correctly—because real results come from combining the right technology with the right system.
That’s one of the biggest concerns people have—and it’s valid. Most devices go unused because they’re inconvenient or complicated. BioVitality Pro™ is designed to remove that friction completely: you simply lie down, press start, and follow guided sessions. Combined with structured protocols and MyPL365™, it becomes part of a routine—not another thing you “should” do.
For many people, the real cost isn’t the device—it’s the ongoing impact of low energy, slow recovery, and inconsistent performance. BioVitality Pro™ is designed to give you consistent access to full body red light therapy at home, combined with a structured system to help you actually use it. Over time, that consistency is what drives meaningful results in how you feel, recover, and perform.
Clinic-based systems can be powerful, but they require scheduling, travel, and ongoing costs—which often makes consistent use difficult. BioVitality Pro™ brings a similar full-body light therapy experience into your home, allowing you to use it regularly without relying on appointments—making consistency far more achievable.
